2024 Honda Power Brush Cutter HHT25SUT4C

Selling Price -

$599.00

Information

2024 Honda Power Brush Cutter HHT25SUT4C

U-Handle 25 cc

Features a tap-and-go trimmer head, bike-type handle, double loop harness and 4-tooth steel-brush cutting blade kit for more serious work.

Features may include:

  • Bike-style handlebar with fingertip controls
  • Multi-strand drive cable that absorbs vibration and impacts
  • Electronic ignition for dependable starts
  • Bevel gear drive
  • Includes Semi-matic (tap-and-go) trimmer head and 4-tooth brush-cutting blade with blade guard and mounting hardward, as well as professional double-loop harness
  • 25 cc Honda GX25 OHC Mini 4-stroke engine
  • Low-tone muffler for quieter operation

Photos

Highlights

  • $599.00
  • Lloydminster, Alberta
  • New
  • In Stock
  • 2024
  • Honda Power
  • Brush Cutter HHT25SUT4C
  • Model: GX25
  • Recommended Fuel: Regular unleaded gasoline (87 Octane) | Fuel Primer: Anti-flood type
  • (Without Blade): 6.15 kg (13.6 lbs.)
  • Available

Specifications

  • 2024
  • Honda Power
  • Brush Cutter
  • HHT25SUT4C
  • General
  • Model: GX25
  • Honda
  • mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°) | Spark Plug: CMR5H (NGK) | Stopping System: Ignition primary circuit ground | Stop Switch: Slide type switch
  • single
  • 25 cc (1.53 CID)
  • 35 mm (1.4 in.)
  • 26 mm (1 in.)
  • 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
  • Idle: 3,100 ± 200 RPM | Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
  • Transistorized flywheel magneto (electronic)
  • Forced air
  • Recoil starter
  • Semi-dry type
  • Oil mist
  • Recommended Fuel: Regular unleaded gasoline (87 Octane) | Fuel Primer: Anti-flood type
  • Centrifugal Twin Shoe-Clutch | Size: 54 mm (2.125 in.) Diameter | Engagement: 4;200 ± 200 RPM
  • Control Type: Two-motion trigger type
  • Flexible steel cable
  • Gear Case: Helical cut bevel gears / Sealed ball bearings
  • 1.235 Input shaft: 1 (Output Shaft)
  • Fuel Consumption (approximate): 0.5 L/hr (0.11 Imp. gal./hr)
  • Cutting Line Diameter: 2.41 mm (0.095 in.) | Main Pipe Diameter: 25.4 mm (1 in.)
  • With Cutter Mounted: 191.0 cm (75.2 in.)
  • (handlebars) 60.5 cm (23.8 in.)
  • 41.5 cm (16.3 in.)
  • 43.2 cm (17 in.)
  • 0.5 L (17.6 fl. Imp. oz.)
  • 80 cc (2.82 fl. Imp. oz.)
  • (Without Blade): 6.15 kg (13.6 lbs.)
  • Handle Type: U-shaped (bike type handle) | Line Type: Quiet LineTM
  • Diaphragm type w/fuel pump
  • Recommended: SAE 10W30 API service classification SJ or later
  • Semi-matic line feed nylon (tap-and-go)
  • Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum